Rubber / Dimethyl Siliconate
TN-770
Precipitated silicone elastomer with a hardness of A70, designed for general purposes. It is translucent and complies with ROHS and FDA requirements. Suitable for manufacturing parts through molding, injection, and extrusion processes.
-
CAS 94363-18-5Componente:
-
SolidoAspecto:
-
TraslucidoColor:
-
68-72Dureza Shore A
-
≥7,5Carga de Rotura, Mpa
-
≥260Elongación, %
-
≤ 6Compresión Set
-
≥15Compresión Set
-
3,1±0,3Contracción Lineal, %
-
Caja de 20kgPresentación
Rubber / Dimethyl Siliconate
TN-730
Precipitated silicone elastomer with a hardness of A30, designed for general purposes. It is translucent and complies with ROHS and FDA requirements. Suitable for manufacturing parts through molding, injection, and extrusion processes.
-
CAS 94363-18-5Componente:
-
SolidoAspecto:
-
TraslucidoColor:
-
28-32Dureza Shore A
-
≥7Carga de Rotura, Mpa
-
≥600Elongación, %
-
≤ 6Compresión Set
-
≥12Desgarro, Kn/m
-
3,8±0,3Contracción Lineal, %
-
Caja de 20kgPresentación:
Rubber / Dimethyl Siliconate
TN-720
Precipitated silicone elastomer with a hardness of A70, designed for general purposes. It is translucent and complies with ROHS and FDA requirements. Suitable for manufacturing parts through molding, injection, and extrusion processes.
-
CAS 94363-18-5Componente:
-
SolidoAspecto:
-
TraslucidoColor:
-
46-58Viscosidad Mooney (ML1+4) 100°C
-
0,5Contenido de cenizas %, max:
-
0,5Contenido de material volátil %, max:
-
0,5Contenido de Jabón, %
-
22,5-24,5Estireno ligado, %
-
4,8-7,0Contenido de ácido orgánico, %
-
0,4Estabilizante agregado, %
-
Densidad, g/cm3Densidad, g/cm3
-
Caja de 20kgPresentación:
Rubber / Dimethyl Siliconate
TN-9081
Precipitated silicone elastomer with a hardness of A80, possessing high mechanical properties. It is transparent and complies with ROHS and FDA requirements. Suitable for manufacturing parts through molding, injection, and extrusion processes.
-
CAS 94363-18-5Componente:
-
SolidoAspecto:
-
TransparenteColor:
-
78-82Dureza Shore A
-
≥8Carga de Rotura, Mpa
-
≥300Elongación, %
-
≤ 5Compresión Set
-
≥35Desgarro, Kn/m
-
3,2±0,3Contracción Lineal, %
-
Caja de 20kgPresentación:
Rubber / Dimethyl Siliconate
TN-9051
Precipitated silicone elastomer with a hardness of A50, featuring high mechanical properties. It is transparent and complies with ROHS and FDA requirements. Suitable for manufacturing parts through molding, injection, and extrusion processes.
-
CAS 94363-18-5Componente:
-
SolidoAspecto:
-
TransparenteColor:
-
48-52Dureza Shore A
-
≥9Carga de Rotura, Mpa
-
≥580Elongación, %
-
≤ 6Compresión Set
-
≥40Desgarro, Kn/m
-
3,5±0,3Contracción Lineal, %
-
Caja de 20kgPresentación:
Rubber / Dimethyl Siliconate
TN-9041
Precipitated silicone elastomer with a hardness of A40, featuring high mechanical properties. It is transparent and complies with ROHS and FDA requirements. Suitable for manufacturing parts through molding, injection, and extrusion processes.
-
CAS 94363-18-5Componente:
-
SolidoAspecto:
-
TransparenteColor:
-
38-42Dureza Shore A
-
≥8,5Carga de Rotura, Mpa
-
≥680Elongación, %
-
≤ 6Compresión Set
-
≥35Desgarro, Kn/m
-
3,6±0,3Contracción Lineal, %
-
Caja de 20kgPresentación:
Rubber / Dimethyl Siliconate
TN-9031
Precipitated silicone elastomer with a hardness of A30, featuring high mechanical properties. It is transparent and complies with ROHS and FDA requirements. Suitable for manufacturing parts through molding, injection, and extrusion processes.
-
CAS 94363-18-5Componente:
-
SolidoAspecto:
-
TransparenteColor:
-
28-32Dureza Shore A
-
≥8Carga de Rotura, Mpa
-
≥800Elongación, %
-
≤ 7Compresión Set
-
≥25Desgarro, Kn/m
-
3,7±0,3Contracción Lineal, %
-
Caja de 20kgPresentación: